Pages

Showing posts with label cooler master. Show all posts
Showing posts with label cooler master. Show all posts

13 December 2011

Cooler Master Storm Trooper Case Review

Cooler Master Storm Trooper

Cooler Master Storm Trooper Case Review

 Our fondness for Cooler Master's full tower computer cases began roughly three years ago when we reviewed the HAF 932. Its stylish, aggressive design was backed by an excellent build quality. The affordable price tag was the icing on the cake for us. At the time, it was easily the ultimate tower case and that opinion remains strong today. The HAF 932 Advanced and HAF X are among the finest full tower chassis money can buy at $150-$200.

Cooler Master has also released various cases under its "Storm" banner, a subsidiary tasked with "arming the gaming revolution." Naturally, this duty is fulfilled by developing new keyboards, mice, cases, mouse pads and audio gear for gamers. To date, the brand has released a strong lineup of mid-sized ATX cases, including the Sniper, Scout and Enforcer. We featured the Enforcer in our recent roundup and found it to be an excellent value at only $85. 

Cooler Master is at it again, releasing yet another gaming-oriented chassis and the first full size model in the Storm lineup. Called the "Trooper," it's priced at $190 -- right alongside the venerable HAF X -- packing several new features: 90-degree rotatable 4-in-3 HDD modules, an easy-to-carry handle, a hidden toolbox to store private goods, a built-in fan controller, an external 2.5" storage drive X-dock and the ability to support up to 14 internal hard drives. 

It's been a year since the HAF X's arrival, and Cooler Master may have already outdone itself... 



 
External Design

The Storm Trooper's design isn't as flashy as some competing gaming cases try to be (Thermaltake's offerings come to mind), but it's not as spartan as Lian Li's products either. Cooler Master seems to have a knack for producing aggressive, yet clean cases. The Trooper is dressed in strict conservative attire, but it's not afraid to show a little leg, if you will. 

The Trooper's size is fairly typical for a full tower ATX case, measuring 9.8" wide, 22.8" long and 23.8" tall (25 x 57.8 x 60.6cm). It's constructed from SECC (Steel, Electrogalvanized, Cold-rolled, Coil), a type of metal known for its low cost and high thermal conduction properties making it ideal for computer cases. There's also plenty of plastic used, but it's blended well with metal, so don't let that scare you off. 




Front on, the Trooper looks astonishing, be sure to check out the pictures for the different angles. The face carries nine metal mesh 5.25" drive bay plates and one 3.5" adapter. There are also two front-mounted 120mm fans that hide behind six of the nine 5.25" mesh plates. 




Below the 5.25" bays is a hidden toolbox that can be accessed by removing the CM Storm-branded module. There's a pair of quick release clips on either side which must be pressed in to remove the panel. Once removed, the hidden toolbox slides out.

Directly above the 5.25" drive bays we find the external 2.5" HDD/SSD X-dock. This is similar to Thermaltake's BlacX Docking Station utilized by the recently reviewed Chaser MK-1, though that particular design supported both 3.5" and 2.5" drives. Still, we welcome the convenient access to 2.5" devices. 




Above the X-dock is the Trooper's front I/O panel, which features two USB 2.0 and two USB 3.0 ports along with a single eSATA connector and two audio jacks. There are also two red LEDs that indicate hard drive activity and power. The power switch is the large button with the CM Storm logo at the very top of the I/O panel while the reset button is much smaller and off to the right.

Integrated into the power button area are three red light indicators that light up when the red LEDs on the case fans are active. Directly below the middle light is a small button that enables and disables the lights. Either side of this button the user will find another two buttons with plus and minus symbols that increase or decrease the internal fan speeds. 



The top of the Trooper looks as impressive as the rest of the case and is again very functional. Behind the front panel is a rubber handle that should make it a bit easier to transport the 30.2lbs (13.7kgs) enclosure (that's before adding components, mind you). Along with the handle is a large amount of ventilation for the top-mounted 200mm fan that also features its own removable dust filter. 



Moving around to the left side, the case door has yet another grill with support for a pair of optional 120mm fans. Although this door doesn't have a window, we're satisfied with the extra ventilation.
The opposite case door features the same indentation and a smaller grill. 



Moving around to the rear of the Trooper, you'll find a simple setup that mounts the power supply at the bottom of the case. Above the power supply bracket are nine expansion slots and a 140mm exhaust fan. 





At the very top, we have some inlet and outlet holes for water-cooling tubes. There is a tenth expansion slot mounted vertically, which could be used for an expansion bracket with USB ports or some other connectivity.

26 November 2011

Cooler Master Silent Pro Hybrid 1050W Power Supply Review

The worst component to fail in your computer is the power supply in my opinion. Without your power supply, your computer can’t run at all since the motherboard, video card, or CPU won’t get power. This makes consumers very picky of what brand of power supply they choose to purchase from. Usually the wattage isn’t the biggest concern since most brands have a good range for any consumers. The biggest concern is usually the ratings that the power supply gets from customer reviews and tech reviews.

Consumers are attracted to a certain product when there are a good amount of people that rate it well, it has a good warranty system, and isn’t too expensive. Cooler Master is a great company for a wide range of products from cases, mice, heat sinks, fans, power supplies and more. Today we will be looking at a pretty good power supply from them. It’s the Cooler Master Silent Pro Hybrid 1050W power supply. It seems like a normal power supply with the same old components, but there are some exclusive additions that cooler master has made to their power supply that differ from most. Let’s take a look and see what they have to offer.

  • Cooler Master Silent Pro Hybrid 1050W
  • User’s Manual
  • 5.25’’ Fan Controller
  • Cooler Master Cable Pouch
  • M/B 24 Pin connecter
  • CPU 4 + 4 Pins x 2
  • PCI-e 6+2 pins x 6
  • SATA x 12
  • Peripheral 4 pins x 5
  • Floppy 4 pins x 1
  • Fan cable 3 pins x 3


Fan Controller
Before getting to the power supply and all its glory, let’s take a look at this cool fan controller Cooler Master has included with their device. There are two settings on the front, one for Auto and the other for Manual. And the left side has Power Fan Speed while the right side has System Fan Speed. This seems like a neat tool to set the power supply’s fan to a certain speed so it can stay silent like the product name. However, there is only one thing that annoyed me about this controller. The dials on the front face that you turn clockwise or counterclockwise for controlling the speed of the fans is pretty stiff. It takes a good bit of force from my fingers to turn it and there isn’t much space for your fingers since they have curved the front face a bit. I think you have to put some WD-40 in order to loosen it up. Other than that though, I think this is still a great addition to the power supply. It will allow users to lower the speed of the fan if their computer does not generate a lot of heat and keep their computer silent.